0
Note to the holiday Corpus Christi 20.06.2019:
Our team cannot be reached by post, fax or telephone.
From Friday 21.06. 8:00 h we are again attainable for you.

SW-MOTECH


New motorcycle accessories 2022 from SW-MOTECH

The SW-MOTECH motorcycle accessories for the 2022 season: SysBag WP side bags, waterproof tank bags, the TRAX Toolbox, variable bar backs and mirror-sets.

With the development of the new SysBag WP family and two new waterproof PRO WP tank bags we offer high-quality adventure soft luggage. The design and functions of the new products speak a clear language: These elegant travel companions offer a reliably dry refuge for your belongings - whether on the tank, the rear or on the side carrier.

In the spacious TRAX Toolbox you can transport tools or a first aid kit - mounted on the inside of the PRO side carrier, it is easily accessible and yet not in the way.

Also new for the 2022 season: Variable bar backs for ergonomic adjustments and stylish mirror sets with a sporty look.




The new SysBag WP family

The SysBag WP models are your reliable companions for uncompromising motorcycle adventures. Thanks to careful material selection and elaborate workmanship, all three bags are completely waterproof and robust.

There is a suitable SysBag WP for every application and every motorcycle - the three models S, M and L differ in luggage volume and type of attachment. All three bags have a roll-top closure and an overlapping lid. The inner pocket is removable, and two freely positionable dividers with Velcro fasteners make it easier to divide up the luggage.

Features of the Sysbag WP side bags

  • Roll-top closure
  • MOLLE patch for attachment of additional pockets
  • Reinforced carrying handles
  • Reflective details for better visibility
  • Lashing eyes for the attachment of cable locks
  • Velcro fasteners for fixing the excess belt lengths



SysBag WP L side bag

The largest model of the SysBag WP side bags is made entirely of TPU material and designed without exception for off-road use: The strap buckles of the front compartment are deliberately placed on the upper side, so no branches can get caught there on narrow trails. The outer edges of the bag are covered with robust Hypalon material, which provides additional protection in case of falls. The four compression straps on both sides allow the bag to be lashed down into a compact unit, even with a low load.

SysBag WP L side bag

Material
  • Made of TPU material
  • Roll-Top made of 210 Ripstop TPU

Function
  • Fastening to the PRO side carrier with adapter plate or by looping on the rear or third-party carriers
  • 100% waterproof in the main compartment
  • one waterproof zipper compartment each on the inside of the lid and the additional compartment
  • Four plastic feet for improved stability and protection of the underside
Volume: 22 - 40 l | Dimensions: 48 x 22 x 41 cm
Weight: 2.9 kg (without adapter plate)
Price: 220,00 € * | Item number: BC.SYS.00.006.10000
Price adapter plate SysBag WP L: 50,00 € *
Available summer 2022

SysBag WP M side bag

The SysBag M WP can be mounted either on the SLC carrier or by looping it on the rear.

We build the SysBag M WP of a TPU base and EVA parts. Both materials are thermowelded and joined together to form a compact unit, making the bag completely waterproof.


Material
  • Made of TPU material and EVA plastic
  • Roll-Top made of 210 Ripstop TPU
SysBag WP M side bag

Function
  • Fastening to the SLC carrier with adapter plate or by looping on the rear or third-party carriers
  • 100% waterproof
  • Waterproof zipper compartment on the inside of the lid
  • Two adjustable positions for mounting on the adapter plate (50mm difference)
Volume: 17- 23 l | Dimensions: 32,5 x 16,5 x 41 cm
Weight: 1,9 kg (without adapter plate)
Price: 170,00 € * | Item number: BC.SYS.00.005.10000
Price adapter plate SysBag WP M: 40,00 € *
Available summer 2022

SysBag WP S side bag

The smallest model of the SysBag WP family impresses with its enormous versatility. It cuts a fine figure on adventure bikes as well as sporty road bikes and persistently defies all external influences.

An integrated EVA inlay gives the SysBag WP S an elegant shape and stability, while the lamination makes the bag waterproof and UV-resistant.

SysBag WP S side bag

Material
  • Made of TPU material and EVA plastic
  • Roll-Top made of 210 Ripstop TPU

Function
  • Fastening to the SLC carrier with adapter plate or by looping on the rear or third-party carriers
  • 100% waterproof
  • Waterproof zipper compartment on the inside of the lid
Volume: 12- 16 l | Dimensions: 32,5 x 16,5 x 33 cm
Weight: 1,6 kg (Without adapter plate)
Price: 140,00 € * | Item number: BC.SYS.00.004.10000
Price adapter plate SysBag WP S: 30,00 € *
Available summer 2022

Waterproof tank bags

After the launch in spring 2021, we are expanding the series of our waterproof tank bags from two to four: with the PRO Cross WP as a small strap version and the PRO City WP for the PRO tank ring.

The body of all PRO WP models is made of TPU material. No seams, no holes, no exposed zippers and all belongings stay completely dry and safe from dust. The sturdy EVA lid with a magnetic closure provides convenient access.


Waterproof tank bags



PRO Cross WP strap tank bag

The PRO Cross WP is a waterproof strap tank bag and has a tight fit, even on small enduro bikes with a narrow tank, the PRO Cross WP can be positioned perfectly. It can be quickly removed via four quick-release fasteners, and the two front buckles only need to be undone for refuelling.

PRO Cross WP strap tank bag
  • Top of the tank bag made of laminated and dimensionally stable EVA material
  • Overlapping lid prevents water penetration
  • Magnetic securing of the lid
  • Welded body made of TPU material without seams
  • MOLLE attachment made of sturdy Hypalon material
  • Sealed zippers

Volume: 5,5l | Dimensions: 24,9 x 20,7 x 19,9 cm | Weight: 0,9 kg
Price: 130,00 € * | Item number: BC.WPB.00.025.10000

Available February 2022

Buy PRO Cross WP



PRO City WP tank bag

The PRO City WP with a luggage volume of 9 litres, it offers waterproof transportation for all your belongings - without the need for a rain cover or an additional inner pocket.

The adjustable partition in the inner compartment with additional mesh compartment provides a clever luggage division. The sturdy outer pockets are equipped with waterproof zippers and are therefore also completely waterproof.

PRO City WP tank bag
  • Top and bottom of the tank bag made of laminated and dimensionally stable EVA material
  • Overlapping lid prevents water penetration
  • Magnetic securing of the lid
  • Welded body made of TPU plastic without seams
  • Viewing compartment for smartphone or cards in the inside cover
  • Sealed zippers
  • For PRO tank ring

Volume: 9 l | Dimensions: 35,7 x 32,1 x 20,6 cm | Weight: 1,4 kg
Price: 220,00 € * | Item number: BC.WPB.00.024.10000

Available summer 2022


The TRAX Toolbox

The TRAX Toolbox is the perfect storage space a set of tools, warning vest, first aid kit or smaller spare parts: Everything has its place in the massive TRAX Toolbox and is easy to reach if the worst comes to the worst.

Made of aluminium, the box has a capacity of 3.3 litres and is splash-proof. Like the TRAX side cases, it is available in two colours: silver anodised or black powder-coated.

The TRAX toolbox is attached to the inside or outside of the PRO side carrier. The position can be variably adjusted using the three attachment points, so the box can be placed under almost any motorcycle rear.

The sealed plastic lid can be fixed to the main body with a simple twist lock. To further protect the contents of the TRAX Toolbox from theft, the rubber stopper included in the scope of delivery can be conveniently replaced by a TRAX lock set available separately.

Functions
  • Robust storage box for tools, first aid kit or smaller items
  • For mounting on the PRO side carrier
  • Made from robust aluminium
  • Splash-proof
  • Sealed plastic lid
  • Expandable with TRAX lock set
  • Available in natural anodized or black powder coated
Details
  • Volume: 3,3 l
  • Dimensions: 28,5 x 19 x 11,3 cm
  • Price: 140€

Buy TRAX Toolbox



Variable bar backs

The variable bar backs allows you the appropriate adjustment of the handlebar, as you can bring the handlebar closer to your own needs for a more comfortable and upright seating position. You can choose between seven different positions, each 5 millimetres apart. SW-MOTECH offers the variable bar backs made of milled and anodised aluminium for handlebars with the following diameters: 22, 28 and 32 millimetres.

The variable bar backs are available in black, silver and anthracite. A bull logo on the front and SW-MOTECH lettering - both engraved - make the bar backs a small and fine accessory for your bike.

  • CNC-milled from high-strength aluminium alloy
  • Corrosion protection through anodization
  • Available in black, silver or anthracite
  • With engraved logo and SW-MOTECH lettering
  • Relocation of the handlebar in 6 positions at a distance of 5 millimeters each
  • Available for vehicles with handlebars with 22, 28 or 32 millimetre diameter
  • Increase by 25 / 28 / 30 millimetre
  • For a more relaxed sitting position
  • Price: 170 €

Available March 2022

Buy bar backs




Mirror Set Sport

We manufacture the adjustable mirrors in a modern and flat design from high-quality forged and black anodised aluminium. Two versions, one with a long and one with a short mirror arm, offer you many adjustment options. The mirror arms consist of continuously adjustable elements and can each be extended by 30 millimetres. This allows the height and length of the mirrors to be adjusted to the requirements of the respective pilot.

Wide range of setting options

The clamp on the mirror thread allows tilting at different angles. The adjustable mirror arms allow individual adjustment of the height and the ball head behind the mirror housing ensures precise alignment of the field of view.

Material:
  • Made from high quality forged aluminium
  • Partial areas and functional surfaces milled
  • Black anodized
  • Engraved SW-MOTECH logo
  • Modern and flat edge design
Function
  • 4 different adjustment possibilities for best possible alignment
  • Stepless rotation and inclination of the mirror arm
  • Length of the mirror arm continuously adjustable in the range of 30 mm
  • Ball head on mirror housing for optimum fine adjustment
  • For the best possible view and precise alignment of the field of vision
  • Mounting on existing mirror connection
  • Price: 250€

Available summer 2022