0
OPEN HOUSE 2023 – THE BIGGEST MOTORCYCLE EVENT IN THE MIDDLE OF GERMANY
02. – 04.06. IN RAUSCHENBERG, BE A PART OF IT!
Указание: обратите внимание на наш график работы во время праздника Тела Господня 20.06.2019:
В это время наша команда не будет доступна по почте, факсу или телефону.
С пятницы, 21 июня с 8:00 вы можете снова связаться с нами.

EVO high beam lights. Light/switch/cable harness/mount. In pairs.

SALE
EVO high beam lights
Light/switch/cable harness/mount. In pairs.
№ товара: NSW.00.490.10101
325,00 €
290,00
с НДС
Немногочисленные статьи
Средний рейтинг:
[1]
Общая сумма:
Цена за единицу:
Базовая цена:
Описание
Проверка мотоцикла
Принадлежности
Отзывы
Загрузки
Есть вопросы о товаре?

EVO High beams

The highly concentrated light of the EVO high beams has a particularly wide range. This provides optimal lighting for the rider's view and ensures safety during on- or off-road riding. SW-MOTECH sought out a reliable partner for the development of the new EVO fog lights and relied on the expertise of a long-standing top manufacturer from the automotive sector. Development is focused on meeting the strictest quality standards while also maintaining a compact shape: the EVO high beams are resistant to water and dust, with an IP69 protective class rating. Powerful LEDs provide the best view, while wear-resistant housings ensure long life.

  • Trouble- and maintenance-free operation due to almost wear-free LED, considerably reduced energy consumption
  • Power output: 12 W each light
  • Luminous flux: 800 LM each light
  • ECE test mark: ECE R113 Rev.2
  • Highly concentrated beam with long-distance range
  • Compact size with a diameter of 7.1cm
  • Water- and dustproof (safety class: IP69)
  • Voltage: 12 V. Cable harness for easy connection to the motorcycle battery included in delivery, no change to motorcycle electric required
  • Splash-protected, blue glowing handlebar switch for comfortable operation (Protection class: IPX4)
  • Mounting points on all four sides
  • Installation on headlight clamps for crash bar (Ø 22, 26, 27, 28 mm) or bike-specific brackets

Included in delivery

  • 2 x EVO High beams
  • 1 x Handlebar switch
  • Mounting instructions
  • Mounting material

Details

  • Material: Aluminum
  • Surface: powder coated
  • Color: black
  • Total Weight: appr. 1,3 kg / appr. 2.9 lb

Note

  • Note that due to the curvature of the reflector the "TOP" mark must always be at the top.
  • Light clamps for crash bar and bike-specific mounts are available separately.
  • Please observe the legal regulations applicable in your country for the operation and installation of high beams

Required for mounting

  • Crash bar clamps or bike-specific light mount

Approval notice

The lights have an ECE test mark (ECE R113 Rev.2).ECE numbers allow installation without third-party approval from a testing institute such as TÜV or DEKRA.The following are decisive in determining how headlights are to be mounted: the national StVZO (German Road Traffic Licensing Act; § 50) within the Federal Republic of Germany and, within Europe, EEC directive 93/92 regarding lighting and signaling devices for two- and three-wheelers. These state, among other things:- Mounting two high beam lights is permitted.- In the case of two high beam lights, the distance between the two lit surfaces must not be greater than 200 mm.- The headlight must emit a white light and the taillight a red light; yellow lights may be used on the sides.- Pairs of lights must be fixed symmetrically to the center of the vehicle and at the same height.- The luminosity of the lights must be the same.- High beams must not be operated at the same time as the fog lights.Regulations for approval in the respective country must be clarified prior to purchasing the product.

Совместим ли этот товар с моей моделью? Выберите свою модель и нажмите «Проверить».
Кнопка проверки появится только тогда, когда вы заполните все поля.
Марка
Модель
год выпуска
Тип
Ø рейтинг:
(1)

Для данного товара были найдены следующие отзывы:
Nice lights, but...
- : (0 из общего количества 0 Покупатели считают этот отзыв полезным)
I installed these lights on the Nine T Scrambler. I used the location of the OEM indicators. Some observations: The wiring loom is very long or not long enough wiring to the Switch , this means cutting out sections you dont need or adding. If you are not comfortable with this you end up with a large bundled pack of surplus wiring. The Switch mounting on the handlebar needs addressing as it is not really designed for 22mm bar diameter.
Если у вас возникнут какие-либо вопросы, предложения или жалобы, пожалуйста, свяжитесь с нами. Вы можете связаться с нашей службой поддержки клиентов ...
... во время мотосезона (1 апреля - 30 сентября)
Понедельник - Четверг с 8:00 до 18:00
Пятница с 8:00 до 16:30
... вне мотосезона (1 октября - 31 марта)
Понедельник - Четверг с 8:00 до 17:00
Пятница с 8:00 до 16:00
Номер товара: NSW.00.490.10101
По телефону +49 (0) 64 25/81 68-05 0
А также по электронной почте на [email protected] или используя следующую контактную форму.
Тема
Фамилия:*
Мой адрес электронный почты:*
Адрес
Страна:*
Пожалуйста уточните*
Марка мотоцикла
Модель мотоцикла:
Другое (не перечисленное выше):
год выпуска
Дата покупки товара
Товар куплен в (компания, местонахождение):
Фотография расскажет больше, чем ... Отправьте нам фотографию (макс. 2 МБ)
Мой вопрос:*
Положение о конфиденциальности*
Покупатели, купившие этот товар, также купили следующие товары:
Black. For Ø 22/25,4/26/27/28 mm crash bars.
35,00
с НДС
Black. For BMW / Ducati / KTM / Triumph models.
30,00
с НДС
3-5 l.
120,00
с НДС
Fog light/switch/cable harness/mount. In pairs.
325,00 €
290,00
с НДС
5-8 l.
150,00
с НДС
50 % more protection. For left and right side.
20,00
с НДС